Insulation Plastic Masonry Fastener

The Plasti-Grip® PMF Anchor is a one-piece polypropylene fastener that permanently attaches rigid and semi-rigid insulation to masonry, concrete, block, brick or stone. It needs no screws, pins or adhesives, and the plastic shank avoids a thermal bridge.

Choosing a length

• 2 in: 1/2 to 3/4 in insulation
• 2-3/4 in: 1 to 1-1/2 in
• 3-1/2 in: 1-1/2 to 2 in
• 4-1/2 in: 2-1/2 to 3 in
• 5-3/8 in: 3-1/2 to 4 in
• 6-1/4 in: 4-1/4 to 5 in

Installation

Pre-drill with a sharp 5/16 in masonry bit in a hammer drill. Drill deeper than the shank will go and clean out the hole, then tap the anchor in with a hammer until the head sits flush.

Details

• 2-3/8 in diameter textured head, which also helps base-coat adhesion in EIFS
• Box of 250 (2 to 4-1/2 in) or 200 (5-3/8 and 6-1/4 in)